Color

Color: Color to be used for the line. Click to choose from the default color palette, or specify RGB values. Default = [0,0,0] (black)

COLOR

3D integer array of the form:

[R, G, B]

Each color value may range from 0 to 255.

Linestyle

Line Style: Style of the polygon lines. Select a line style from the list. Default = (solid line)

LINESTYLE

An integer value specifying a predefined line style, or a two-element vector specifying a stippling pattern.

The predefined line styles are:

0 (Solid line--the default)

1 (Dotted)

2 (Dashed)

3 (Dash dot)

4 (Dash dot dot dot)

5 (Long dash)

6 (No line drawn)

To define your own stippling pattern, specify a two-element vector [repeat, bitmask], where repeat indicates the number of times consecutive runs of 1's or 0's in the bitmask should be repeated. (That is, if three consecutive 0's appear in the bitmask and the value of repeat is 2, the line will have six consecutive bits turned off.) The value of repeat must be in the range 1 <= repeat <= 255.

The bitmask indicates which pixels are drawn and which are not along the length of the line. Bitmask is most conveniently specified as a 16-bit hexadecimal value.

For example, LINESTYLE = [2, 'F0F0'X] describes a dashed line (8 bits on, 8 bits off, 8 bits on, 8 bits off).

Thickness

Line Thickness: Thickness of the polygon lines in points. Select a thickness from the list. Default = 1

THICK

A floating-point value between 1.0 (the default) and 10.0.

Transparency

Number: Level of transparency.

Default = 0

TRANSPARENCY

Integer